Page 1 of 3 123 LastLast
Results 1 to 25 of 68

Thread: New Hybridi Hippo

  1. #1
    Standard
    Join Date
    Feb 2007
    Location
    Turku Finland
    Posts
    59

    Thumbs up New Hybridi Hippo

    Yeap i´m starting re-building my proto.

    Hybridi Hippo

    SB 350 cid stroked 383 MEGASQUIRT is coming
    TH350+NP208 planetary+slice mog cas
    2x 406 mogs front axles -hydraulic lockings
    Stearing brakes
    2.5" Saw air shocks and hydraulic body lifting
    And more all kind spesial things.....


    This it was...

    Name:  Eurotrial esittely.jpg
Views: 3033
Size:  50.1 KB Name:  Talma.jpg
Views: 2912
Size:  490.6 KB


    Here we go... starting stripp

    Name:  IMG_0217.jpg
Views: 2896
Size:  474.2 KB Name:  IMG_0226.jpg
Views: 2731
Size:  433.6 KB

    Name:  IMG_0249.jpg
Views: 2817
Size:  465.6 KB

    JIG build up 2x300x400

    Name:  IMG_0283.jpg
Views: 2765
Size:  501.8 KB

    Line up and horisontal line

    Name:  IMG_0290.jpg
Views: 2651
Size:  320.0 KB

    Here couple reasons for re-building.. old frame was for FJ-55 yotas with couple modifi....

    Name:  IMG_0301.jpg
Views: 2667
Size:  453.1 KB Name:  IMG_0303.jpg
Views: 2661
Size:  434.8 KB

    Welded on the jig and first assembly for cage and frame

    Name:  IMG_0314.jpg
Views: 2611
Size:  506.7 KB Name:  IMG_0318.jpg
Views: 2596
Size:  492.0 KB

    Second "the start up cage" starts to look like something

    Name:  IMG_0321.jpg
Views: 2500
Size:  486.3 KB Name:  IMG_0326.jpg
Views: 2437
Size:  440.1 KB

    Name:  IMG_0328.jpg
Views: 2460
Size:  491.6 KB Name:  IMG_0341.jpg
Views: 2432
Size:  494.9 KB

    Assembly fist real frame

    Name:  IMG_0357.jpg
Views: 2427
Size:  517.3 KB Name:  IMG_0358.jpg
Views: 2394
Size:  373.2 KB

    Name:  IMG_0361.jpg
Views: 2350
Size:  514.3 KB

    Test welding some tube 105 A with 2.4mm elektrod was best 48x2,6 tube

    Name:  IMG_0374.jpg
Views: 2377
Size:  329.1 KB

    Yeap now i´ll take frame and move to benders garage Bein oy
    And here are the benders

    Name:  IMG_0394.jpg
Views: 2389
Size:  474.3 KB Name:  IMG_0350.jpg
Views: 2343
Size:  463.7 KB

    Tubes bended more and attached in place " rock sliders"

    Name:  IMG_0381.jpg
Views: 2309
Size:  468.6 KB

    Head and sidetubes in place and test sitting with my frend...

    Name:  IMG_0385.jpg
Views: 2262
Size:  488.7 KB Name:  IMG_0386.jpg
Views: 2275
Size:  485.1 KB

    Door pipes in place

    Name:  IMG_0388.jpg
Views: 2234
Size:  485.7 KB Name:  IMG_0389.jpg
Views: 2320
Size:  492.0 KB

    X-pipes in place

    Name:  IMG_0393.jpg
Views: 2288
Size:  503.3 KB

  2. #2
    Avdanka biltrialfører Tommy's Avatar
    Join Date
    Jan 2007
    Location
    Froland
    Posts
    9,866

    Default

    LOOKING GOOD... will you be in the tracks this year??
    Tommy Olsen
    tlf: 94141987
    tommy @ pirate4x4.no

  3. #3
    Standard
    Join Date
    Feb 2007
    Location
    Turku Finland
    Posts
    59

    Default

    If everything goes by plan... yeap i´m driving

  4. #4
    Standard junde's Avatar
    Join Date
    Jul 2007
    Location
    Klaukkala, FINLAND
    Posts
    105

    Default

    Hienoa Hippo!

    Tuo näyttää hyvältä, toki muutamia unettomia öitä on vielä edessä:o
    Meinaatko tehdä tuollaisen rock crawler tyyppiset ulkokuoret vai laitatko vielä auton näköiseksi?

    Junde

  5. #5
    Standard
    Join Date
    Feb 2007
    Location
    Turku Finland
    Posts
    59

    Default

    Quote Originally Posted by junde View Post
    Hienoa Hippo!

    Tuo näyttää hyvältä, toki muutamia unettomia öitä on vielä edessä:o
    Meinaatko tehdä tuollaisen rock crawler tyyppiset ulkokuoret vai laitatko vielä auton näköiseksi?

    Junde
    Name tells everything... Photo more

    Name:  81393557_hD7iRv5q_IMG_7994E.jpg
Views: 2206
Size:  462.6 KB

  6. #6
    Gode Minner Tore Hansen's Avatar
    Join Date
    Jan 2007
    Location
    tvedestrand
    Posts
    1,471

    Default

    that was a ugly mother fucker!!! - and i dont mean your car
    HVOR LANGT KOMMER JEG FOR ÅTTEOGTJUE`A??

  7. #7
    Flyin' Finn Jare's Avatar
    Join Date
    Feb 2007
    Location
    Finland
    Posts
    351

    Default

    Quote Originally Posted by Tore Hansen View Post
    that was a ugly mother fucker!!! - and i dont mean your car

    That's picture of Hippo after christmas party drinking....HEAVY DRINKING:p:p


    LOOKS GREAT!!!!!!! You have been actually doing something during the weekend!!!!

    Oh and don't forget to post more pictures as the project gets going......

  8. #8
    Original KJELLIS's Avatar
    Join Date
    Feb 2007
    Location
    Halden Norges navle
    Posts
    2,070

    Default

    Yes nice, but why have you build the frame smaller on the left side (transfercase)??

  9. #9
    Avdanka biltrialfører Tommy's Avatar
    Join Date
    Jan 2007
    Location
    Froland
    Posts
    9,866

    Default

    Its not smaler on the left side the hole frame is bended towards right... Why I also wounder..
    Tommy Olsen
    tlf: 94141987
    tommy @ pirate4x4.no

  10. #10
    Original KJELLIS's Avatar
    Join Date
    Feb 2007
    Location
    Halden Norges navle
    Posts
    2,070

    Default

    yes i see that but it will be smaller inside on left side?

  11. #11
    Standard
    Join Date
    Feb 2007
    Location
    Turku Finland
    Posts
    59

    Default

    Motor line is 90mm offset from front axle tubeline. It´s easyer make motor mountings when they are near the block

  12. #12
    Original KJELLIS's Avatar
    Join Date
    Feb 2007
    Location
    Halden Norges navle
    Posts
    2,070

    Default

    ok good answer

  13. #13
    Standard
    Join Date
    Feb 2007
    Location
    Turku Finland
    Posts
    59

    Default

    Yep it´s back in my garage:):) tomorrow i´ll be welding it to jig... I´ll be posting photos when i remember to take camera with me:p:p

  14. #14
    Standard
    Join Date
    Feb 2007
    Location
    Turku Finland
    Posts
    59

    Default Up date

    I´ll been done something
    Name:  IMG_0399.JPG
Views: 2091
Size:  124.2 KB Name:  IMG_0400.JPG
Views: 2013
Size:  137.4 KB

    Name:  IMG_0401.JPG
Views: 2010
Size:  138.0 KB Name:  IMG_0402.JPG
Views: 1961
Size:  132.7 KB

    Name:  IMG_0403.JPG
Views: 1947
Size:  111.2 KB Name:  IMG_0404.JPG
Views: 1975
Size:  132.1 KB

    Name:  IMG_0405.JPG
Views: 1943
Size:  130.3 KB Name:  IMG_0406.JPG
Views: 2230
Size:  143.2 KB

    It starts to look something

  15. #15
    Jeeps are bils, not båts! Amund's Avatar
    Join Date
    Jan 2007
    Location
    Oslo
    Posts
    2,687

    Default

    Nice ass!
    Jeeps are bils, not båts!

  16. #16
    Gode Minner Tore Hansen's Avatar
    Join Date
    Jan 2007
    Location
    tvedestrand
    Posts
    1,471

    Default

    looking forward too see this in the tracks,looks good
    HVOR LANGT KOMMER JEG FOR ÅTTEOGTJUE`A??

  17. #17
    Standard
    Join Date
    Feb 2007
    Location
    Turku Finland
    Posts
    59

    Default

    Some update pics

    Everything that was bended is welded now.

    Name:  IMG_0421 copy.jpg
Views: 1898
Size:  82.7 KB

    Name:  IMG_0428 copy.jpg
Views: 1864
Size:  78.3 KB

    Some tube here and there

    Name:  IMG_0430 copy.jpg
Views: 1961
Size:  87.5 KB

    Name:  IMG_0438 copy.jpg
Views: 1853
Size:  80.2 KB

    Name:  IMG_0439 copy.jpg
Views: 1861
Size:  79.9 KB

    Name:  IMG_0440 copy.jpg
Views: 1850
Size:  84.3 KB

    Here one more diagonal back

    Name:  IMG_0441 copy.jpg
Views: 1861
Size:  52.8 KB

    Now to design front pipes....

  18. #18
    Gode Minner Tore Hansen's Avatar
    Join Date
    Jan 2007
    Location
    tvedestrand
    Posts
    1,471

    Default

    - looks good... nice work with the tubes
    HVOR LANGT KOMMER JEG FOR ÅTTEOGTJUE`A??

  19. #19
    Standard
    Join Date
    Feb 2007
    Location
    Turku Finland
    Posts
    59

    Default

    I went to visit at bender work shop and look what he done with my pipes..

    Name:  IMG_0461 copy.jpg
Views: 1813
Size:  74.9 KB

    So i had to work out off something of those...
    And came around something like this

    Name:  IMG_0462 copy.jpg
Views: 1778
Size:  81.0 KB

    Headers are old ;)

    Name:  IMG_0463 copy.jpg
Views: 1798
Size:  89.5 KB

    Name:  IMG_0464 copy.jpg
Views: 1766
Size:  86.1 KB

  20. #20
    Avdanka biltrialfører Tommy's Avatar
    Join Date
    Jan 2007
    Location
    Froland
    Posts
    9,866

    Default

    wow... I really love those crazy bends..
    Tommy Olsen
    tlf: 94141987
    tommy @ pirate4x4.no

  21. #21
    mitä vittua sos-kuksa's Avatar
    Join Date
    Feb 2007
    Location
    jyväskylä-finland
    Posts
    66

    Default

    look nice when its ready
    emmä tajuu

  22. #22
    Standard
    Join Date
    Feb 2007
    Location
    Turku Finland
    Posts
    59

    Default

    Quote Originally Posted by sos-kuksa View Post
    look nice when its ready
    2008...... talma?!?!

  23. #23
    Original KJELLIS's Avatar
    Join Date
    Feb 2007
    Location
    Halden Norges navle
    Posts
    2,070

    Default

    Quote Originally Posted by Hybridi Hippo View Post
    2008...... talma?!?!
    you must work hard if you will be ready in may. nice work:p

  24. #24
    Standard
    Join Date
    Feb 2007
    Location
    Turku Finland
    Posts
    59

    Default

    Front pipes that are going to be welded in place.

    Name:  IMG_0470 copy.jpg
Views: 1668
Size:  76.6 KB Name:  IMG_0471 copy.jpg
Views: 1722
Size:  82.4 KB

    Name:  IMG_0472 copy.jpg
Views: 1639
Size:  90.4 KB Name:  IMG_0473 copy.jpg
Views: 1670
Size:  72.7 KB


    I just hav´to wait for my new intake manifold to finnished all pipes in front.
    Rest of the pipes are coming to be removable...

    And one design from the middle console

    Name:  IMG_0477 copy.jpg
Views: 1647
Size:  49.2 KB

  25. #25
    mitä vittua sos-kuksa's Avatar
    Join Date
    Feb 2007
    Location
    jyväskylä-finland
    Posts
    66

    Default

    mites etenee
    emmä tajuu

Page 1 of 3 123 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •