PDA

View Full Version : volvo t5 engine immobilizer question



xtreme5304
07-01-2010, 14:26
hi guys,

i have a question about the engine immobilizer of my volvo s70 t5 engine.

can somebody tell me how to bridge the engine immobilizer box???

do i have to use the key and the ignition lock of the volvo or is there a seperate box?

the fuc..... engine will not run...... :pissed::pissed::pissed:

thanks everybody

marlon

babyblue
07-06-2010, 15:35
I think its easier to find a ignitionbox nr. Bosch 0261 203 073(074) from -94 or earlier.
They dont have immobilizer.
I had same problem with my -96 T5.

:eyemouth:

Åsa-nisse
07-07-2010, 07:06
You must have the original key and ignitionswitch. I think you have "drive by wire" on that engine so you could not use an older box.

xtreme5304
07-07-2010, 09:01
hi,

yesterday i removed the ignition lock and the immo box.

now i want to link the immobox with the engine control unit again.

i´ll see what happen.


bye
marlon

xtreme5304
07-07-2010, 20:27
hi,


@asa-nisse

no, it´is an engine from 1998 without "drive by wire".

do you have a wirring diagramm from the t5?


thanks
marlon

Lasse suzicán
07-07-2010, 20:56
Do you have the 2,0 l engine (226hp), or the 2,3 l (239hp)????
I have wiring diagram on both of them...

It would be best if you could tell us the engine code, for example B5234T4, B5204T3 or what you have...
In 1998 both T5-engines have drive-by-wire throttle...

Åsa-nisse
07-08-2010, 06:43
hi,


@asa-nisse

no, it´is an engine from 1998 without "drive by wire".

do you have a wirring diagramm from the t5?


thanks
marlon

No i have only wiring diagram for Volvo 850Turbo and GLT with Motronic 4.3 without immobilizer. My injection are from 1994 but the rest are from many different years. The Wiring in my engine was not so difficult to connect together in my Jeep.

Have you checked out too replace your system with an aftermarket system?
This system a friend of mine have put in his Offroadcar - http://kms.vankronenburg.nl/ - and the price is not so bad.

xtreme5304
07-08-2010, 10:36
hi,

the engine code is B5234T3.

2.3 239HP

thanks
marlon

xtreme5304
07-09-2010, 14:39
hi guys,

my engine code is b5234T3. that is printed on the casing of the timing belt and this is written in my car documents.

at many websites they said: this engine code has the 4.3 or 4.4 motronic.

now if looked at my engine control unit. there is a badge with 3.2 J on it.

that doesn´t make sense to me.:shaking:

is it possible to have a 1998 T5 engine with the 3.2 jetronic?
furthermore it hasn´t "drive by wire" there is a conventional cable control at the throttle valve.

thanks
marlon

Lasse suzicán
07-10-2010, 13:29
I think that yoy have Motronic 4.4 This system is not equipped with "drive-by-wire" as ME7.0 are...

What Bosch-number is it on the box???


Motronic LH 3.2 was only fitted on Volvo 240, 740 and 850 up to 1996...

xtreme5304
07-11-2010, 17:38
hi lasse,

the bosch number on the box:

BOSCH
0 261 204 449

1766 01 04
76512