Page 1 of 3 123 LastLast
Results 1 to 25 of 68

Thread: New Hybridi Hippo

  1. #1
    Standard
    Join Date
    Feb 2007
    Location
    Turku Finland
    Posts
    59

    Thumbs up New Hybridi Hippo

    Yeap i´m starting re-building my proto.

    Hybridi Hippo

    SB 350 cid stroked 383 MEGASQUIRT is coming
    TH350+NP208 planetary+slice mog cas
    2x 406 mogs front axles -hydraulic lockings
    Stearing brakes
    2.5" Saw air shocks and hydraulic body lifting
    And more all kind spesial things.....


    This it was...

    Name:  Eurotrial esittely.jpg
Views: 3025
Size:  50.1 KB Name:  Talma.jpg
Views: 2902
Size:  490.6 KB


    Here we go... starting stripp

    Name:  IMG_0217.jpg
Views: 2885
Size:  474.2 KB Name:  IMG_0226.jpg
Views: 2723
Size:  433.6 KB

    Name:  IMG_0249.jpg
Views: 2808
Size:  465.6 KB

    JIG build up 2x300x400

    Name:  IMG_0283.jpg
Views: 2759
Size:  501.8 KB

    Line up and horisontal line

    Name:  IMG_0290.jpg
Views: 2640
Size:  320.0 KB

    Here couple reasons for re-building.. old frame was for FJ-55 yotas with couple modifi....

    Name:  IMG_0301.jpg
Views: 2658
Size:  453.1 KB Name:  IMG_0303.jpg
Views: 2653
Size:  434.8 KB

    Welded on the jig and first assembly for cage and frame

    Name:  IMG_0314.jpg
Views: 2607
Size:  506.7 KB Name:  IMG_0318.jpg
Views: 2591
Size:  492.0 KB

    Second "the start up cage" starts to look like something

    Name:  IMG_0321.jpg
Views: 2490
Size:  486.3 KB Name:  IMG_0326.jpg
Views: 2433
Size:  440.1 KB

    Name:  IMG_0328.jpg
Views: 2450
Size:  491.6 KB Name:  IMG_0341.jpg
Views: 2423
Size:  494.9 KB

    Assembly fist real frame

    Name:  IMG_0357.jpg
Views: 2423
Size:  517.3 KB Name:  IMG_0358.jpg
Views: 2387
Size:  373.2 KB

    Name:  IMG_0361.jpg
Views: 2341
Size:  514.3 KB

    Test welding some tube 105 A with 2.4mm elektrod was best 48x2,6 tube

    Name:  IMG_0374.jpg
Views: 2370
Size:  329.1 KB

    Yeap now i´ll take frame and move to benders garage Bein oy
    And here are the benders

    Name:  IMG_0394.jpg
Views: 2381
Size:  474.3 KB Name:  IMG_0350.jpg
Views: 2337
Size:  463.7 KB

    Tubes bended more and attached in place " rock sliders"

    Name:  IMG_0381.jpg
Views: 2299
Size:  468.6 KB

    Head and sidetubes in place and test sitting with my frend...

    Name:  IMG_0385.jpg
Views: 2257
Size:  488.7 KB Name:  IMG_0386.jpg
Views: 2266
Size:  485.1 KB

    Door pipes in place

    Name:  IMG_0388.jpg
Views: 2226
Size:  485.7 KB Name:  IMG_0389.jpg
Views: 2311
Size:  492.0 KB

    X-pipes in place

    Name:  IMG_0393.jpg
Views: 2279
Size:  503.3 KB

  2. #2
    Avdanka biltrialfører Tommy's Avatar
    Join Date
    Jan 2007
    Location
    Froland
    Posts
    9,866

    Default

    LOOKING GOOD... will you be in the tracks this year??
    Tommy Olsen
    tlf: 94141987
    tommy @ pirate4x4.no

  3. #3
    Standard
    Join Date
    Feb 2007
    Location
    Turku Finland
    Posts
    59

    Default

    If everything goes by plan... yeap i´m driving

  4. #4
    Standard junde's Avatar
    Join Date
    Jul 2007
    Location
    Klaukkala, FINLAND
    Posts
    105

    Default

    Hienoa Hippo!

    Tuo näyttää hyvältä, toki muutamia unettomia öitä on vielä edessä:o
    Meinaatko tehdä tuollaisen rock crawler tyyppiset ulkokuoret vai laitatko vielä auton näköiseksi?

    Junde

  5. #5
    Standard
    Join Date
    Feb 2007
    Location
    Turku Finland
    Posts
    59

    Default

    Quote Originally Posted by junde View Post
    Hienoa Hippo!

    Tuo näyttää hyvältä, toki muutamia unettomia öitä on vielä edessä:o
    Meinaatko tehdä tuollaisen rock crawler tyyppiset ulkokuoret vai laitatko vielä auton näköiseksi?

    Junde
    Name tells everything... Photo more

    Name:  81393557_hD7iRv5q_IMG_7994E.jpg
Views: 2198
Size:  462.6 KB

  6. #6
    Gode Minner Tore Hansen's Avatar
    Join Date
    Jan 2007
    Location
    tvedestrand
    Posts
    1,471

    Default

    that was a ugly mother fucker!!! - and i dont mean your car
    HVOR LANGT KOMMER JEG FOR ÅTTEOGTJUE`A??

  7. #7
    Flyin' Finn Jare's Avatar
    Join Date
    Feb 2007
    Location
    Finland
    Posts
    351

    Default

    Quote Originally Posted by Tore Hansen View Post
    that was a ugly mother fucker!!! - and i dont mean your car

    That's picture of Hippo after christmas party drinking....HEAVY DRINKING:p:p


    LOOKS GREAT!!!!!!! You have been actually doing something during the weekend!!!!

    Oh and don't forget to post more pictures as the project gets going......

  8. #8
    Original KJELLIS's Avatar
    Join Date
    Feb 2007
    Location
    Halden Norges navle
    Posts
    2,070

    Default

    Yes nice, but why have you build the frame smaller on the left side (transfercase)??

  9. #9
    Avdanka biltrialfører Tommy's Avatar
    Join Date
    Jan 2007
    Location
    Froland
    Posts
    9,866

    Default

    Its not smaler on the left side the hole frame is bended towards right... Why I also wounder..
    Tommy Olsen
    tlf: 94141987
    tommy @ pirate4x4.no

  10. #10
    Original KJELLIS's Avatar
    Join Date
    Feb 2007
    Location
    Halden Norges navle
    Posts
    2,070

    Default

    yes i see that but it will be smaller inside on left side?

  11. #11
    Standard
    Join Date
    Feb 2007
    Location
    Turku Finland
    Posts
    59

    Default

    Motor line is 90mm offset from front axle tubeline. It´s easyer make motor mountings when they are near the block

  12. #12
    Original KJELLIS's Avatar
    Join Date
    Feb 2007
    Location
    Halden Norges navle
    Posts
    2,070

    Default

    ok good answer

  13. #13
    Standard
    Join Date
    Feb 2007
    Location
    Turku Finland
    Posts
    59

    Default

    Yep it´s back in my garage:):) tomorrow i´ll be welding it to jig... I´ll be posting photos when i remember to take camera with me:p:p

  14. #14
    Standard
    Join Date
    Feb 2007
    Location
    Turku Finland
    Posts
    59

    Default Up date

    I´ll been done something
    Name:  IMG_0399.JPG
Views: 2079
Size:  124.2 KB Name:  IMG_0400.JPG
Views: 2005
Size:  137.4 KB

    Name:  IMG_0401.JPG
Views: 2000
Size:  138.0 KB Name:  IMG_0402.JPG
Views: 1956
Size:  132.7 KB

    Name:  IMG_0403.JPG
Views: 1937
Size:  111.2 KB Name:  IMG_0404.JPG
Views: 1969
Size:  132.1 KB

    Name:  IMG_0405.JPG
Views: 1934
Size:  130.3 KB Name:  IMG_0406.JPG
Views: 2222
Size:  143.2 KB

    It starts to look something

  15. #15
    Jeeps are bils, not båts! Amund's Avatar
    Join Date
    Jan 2007
    Location
    Oslo
    Posts
    2,687

    Default

    Nice ass!
    Jeeps are bils, not båts!

  16. #16
    Gode Minner Tore Hansen's Avatar
    Join Date
    Jan 2007
    Location
    tvedestrand
    Posts
    1,471

    Default

    looking forward too see this in the tracks,looks good
    HVOR LANGT KOMMER JEG FOR ÅTTEOGTJUE`A??

  17. #17
    Standard
    Join Date
    Feb 2007
    Location
    Turku Finland
    Posts
    59

    Default

    Some update pics

    Everything that was bended is welded now.

    Name:  IMG_0421 copy.jpg
Views: 1892
Size:  82.7 KB

    Name:  IMG_0428 copy.jpg
Views: 1859
Size:  78.3 KB

    Some tube here and there

    Name:  IMG_0430 copy.jpg
Views: 1950
Size:  87.5 KB

    Name:  IMG_0438 copy.jpg
Views: 1847
Size:  80.2 KB

    Name:  IMG_0439 copy.jpg
Views: 1856
Size:  79.9 KB

    Name:  IMG_0440 copy.jpg
Views: 1843
Size:  84.3 KB

    Here one more diagonal back

    Name:  IMG_0441 copy.jpg
Views: 1852
Size:  52.8 KB

    Now to design front pipes....

  18. #18
    Gode Minner Tore Hansen's Avatar
    Join Date
    Jan 2007
    Location
    tvedestrand
    Posts
    1,471

    Default

    - looks good... nice work with the tubes
    HVOR LANGT KOMMER JEG FOR ÅTTEOGTJUE`A??

  19. #19
    Standard
    Join Date
    Feb 2007
    Location
    Turku Finland
    Posts
    59

    Default

    I went to visit at bender work shop and look what he done with my pipes..

    Name:  IMG_0461 copy.jpg
Views: 1805
Size:  74.9 KB

    So i had to work out off something of those...
    And came around something like this

    Name:  IMG_0462 copy.jpg
Views: 1768
Size:  81.0 KB

    Headers are old ;)

    Name:  IMG_0463 copy.jpg
Views: 1794
Size:  89.5 KB

    Name:  IMG_0464 copy.jpg
Views: 1759
Size:  86.1 KB

  20. #20
    Avdanka biltrialfører Tommy's Avatar
    Join Date
    Jan 2007
    Location
    Froland
    Posts
    9,866

    Default

    wow... I really love those crazy bends..
    Tommy Olsen
    tlf: 94141987
    tommy @ pirate4x4.no

  21. #21
    mitä vittua sos-kuksa's Avatar
    Join Date
    Feb 2007
    Location
    jyväskylä-finland
    Posts
    66

    Default

    look nice when its ready
    emmä tajuu

  22. #22
    Standard
    Join Date
    Feb 2007
    Location
    Turku Finland
    Posts
    59

    Default

    Quote Originally Posted by sos-kuksa View Post
    look nice when its ready
    2008...... talma?!?!

  23. #23
    Original KJELLIS's Avatar
    Join Date
    Feb 2007
    Location
    Halden Norges navle
    Posts
    2,070

    Default

    Quote Originally Posted by Hybridi Hippo View Post
    2008...... talma?!?!
    you must work hard if you will be ready in may. nice work:p

  24. #24
    Standard
    Join Date
    Feb 2007
    Location
    Turku Finland
    Posts
    59

    Default

    Front pipes that are going to be welded in place.

    Name:  IMG_0470 copy.jpg
Views: 1659
Size:  76.6 KB Name:  IMG_0471 copy.jpg
Views: 1718
Size:  82.4 KB

    Name:  IMG_0472 copy.jpg
Views: 1629
Size:  90.4 KB Name:  IMG_0473 copy.jpg
Views: 1661
Size:  72.7 KB


    I just hav´to wait for my new intake manifold to finnished all pipes in front.
    Rest of the pipes are coming to be removable...

    And one design from the middle console

    Name:  IMG_0477 copy.jpg
Views: 1637
Size:  49.2 KB

  25. #25
    mitä vittua sos-kuksa's Avatar
    Join Date
    Feb 2007
    Location
    jyväskylä-finland
    Posts
    66

    Default

    mites etenee
    emmä tajuu

Page 1 of 3 123 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •